Upload a drawing. Get the whole PPAP package back.
RQube reads your customer's drawing, balloons every dimension, and builds the feasibility report, inspection reports, PFD, PFMEA, Control Plan, calibration records, MSA and SPC studies from that one dataset — in AIAG formats your customer already accepts.
Runs on your own PC · Your drawings never leave the plant
The part of PPAP nobody enjoys
The engineering is done. What's left is transcription — and that's where the hours and the rejections come from.
Doing it by hand
- ✕ Ballooning every dimension on the drawing takes hours per part.
- ✕ The same values get re-typed into the LIR, then the PFD, then the Control Plan.
- ✕ One drawing revision means editing every document again.
- ✕ Format inconsistencies come back as customer rejections.
- ✕ MSA and SPC live in separate spreadsheets nobody can find.
Doing it with RQube
- ✓ Vector + OCR detection reads diameters, limits, threads and GD&T automatically.
- ✓ One dataset feeds LIR, PFD, PFMEA, Control Plan and the inspection reports.
- ✓ Change a dimension once and every document follows.
- ✓ Exports in the AIAG formats your customer already signs off.
- ✓ Gage R&R and capability studies built into the same tool.
Twelve documents from one drawing
Everything below is generated from the same detected dataset, so the numbers agree across every sheet you submit.
Automatic ballooning
Reads diameters, limits, threads, chamfers and GD&T, and assigns the right measurement method to each.
Ballooned drawing PDF
Clean numbered drawing, traceable back to every characteristic in the reports.
Manufacturing Feasibility Report
Feature-by-feature feasibility review off the ballooned drawing — process, gauge and capability readiness recorded for sign-off before you commit.
Layout Inspection Report
Nominal, limits and method per characteristic, with automatic OK / NOT OK against spec.
Process Flow Diagram
Operation-mapped PFD, with multi-operation balloon suffixes handled for you.
PFMEA
AIAG-VDA 1st Edition seven-step method and classic AIAG 4th Edition RPN, with Action Priority applied.
Control Plan
Full AIAG control plan — characteristics, methods, frequency, responsibility and reaction plans.
In-process inspection reports
Setup Approval, Patrol and Self Inspection sheets built straight from the Control Plan, each with its own sample size and frequency.
MSA Gage R&R
Average-Range and ANOVA studies with %GRR, ndc and the full variance breakdown.
SPC capability
X-bar and R charts, histogram, normality test and Cp / Cpk / Pp / Ppk with a pass-fail verdict.
Line control charts
Blank Run and Pre-Control (GYR) sheets for the shop floor, auto-scaled from the tolerance.
Gauge calibration & checking aids
Instrument master with calibration due tracking and alerts, plus checking aid and fixture records tied to the characteristics they verify.
What it looks like
Real output from the software — not mockups.
Four steps, start to submission
The order matters here — each step feeds the next from the same dataset.
Upload
Drop in the customer drawing as PDF, JPG/PNG or DWG/DXF.
Detect
Dimensions are read and ballooned, each with a measurement method assigned.
Generate
LIR, PFD, PFMEA, Control Plan and the inspection reports build themselves.
Analyse
Run Gage R&R and capability studies, and export everything for submission.
One licence, no subscription
Buy it once for the machine it runs on. Nothing renews.
One-time cost for one designated system
- ✓ Installed and commissioned at your plant
- ✓ On-site training for your quality team
- ✓ Free service, support and updates for the first 12 months
- ✓ Runs offline — drawings and data stay on your machine
- ✓ From year two, annual maintenance at 10% of the module value — software only, the licence is never re-charged
